NT CAT DMP-30 CAS: 90-72-2 Tris(dimethylaminomethyl)phenol Overview: DMP-30 CAS: 90-72-2 Tris(dimethylaminomethyl)phenol Common Name: Tris(dimethylaminomethyl)phenol Other Chemical Names: Tris(dimethylaminomethyl)phenol,2,4,6-;2,4,6-TRI(DIMETHYLAMINOETHYL)PHENOL;a,a',a''-Tris(dimethylamino)mesitol;ProChemicalbooktexNX3;TAP(aminophenol);VersamineEH30;Tris-(dimethylaminemethyl)phenol;2,4,6-TRIS(DIMETHYLAMINO-METHYL)PHENOL MF： C15H27N3O MW： 265.39 CAS： 90-72-2 Typical Properties Appearance Form: clear, viscous liquid Colour: light yellow Initial boiling point and boiling range 130 - 135 °C at 1 hPa - lit. Flash point 124 °C - closed cup Vapour density 9,16 - (Air = 1.0) Relative density 0,969 g/mL at 25 °C Viscosity 120~250 Features and uses: NT CAT DMP-30 is a tertiary amine accelerator, commonly used in the production of epoxy resin and polyurethane products. NT CAT DMP-30 is commonly used in epoxy resin coatings, adhesives and other industries to accelerate the reaction in curing agent systems such as polyamide, polyether amine, anhydride, and reduce the reaction temperature. NT CAT DMP-30 addition amount accounts for 5-12% of the curing dose. Storage Information Recommends that our catalysts be stored in a dry and cool area under appropriate ventilation conditions. Each container should be closed tightly to avoid contamination with moisture or other negative influences that could change the products' performance in the end use. The optimum storage temperature is between 10 °C and 30 °C. Lower and higher storage temperatures are not preferable and should be avoided. Shelf Life: 24 months Standard Packaging: 200KG Steel Drum 1000KG IBC Drum (DABCO TMR-30, PC CAT NP30, K54) info@newtopchem.com More：https://www.newtopchem.com/archives/633 Technical support and business contacts E-mail：info@newtopchem.com

NT CAT PC-5 CAS No.: 3030-47-5 Product Application Brief introduction. Chemical name: N,N,N′,N′,N″-Pentamethyldiethylenetriamine Alias: Pentamethyldiethylenetriamine Abbreviation: PMDETA English name: N,N,N′,N′,N″-pentamethyldiethylenetriamine Molecular formula: C9H23N3 Relative molecular mass 173.3 CAS No. 3030-47-5 Applications. Pentamethyldiethylenetriamine (PMDETA) is a highly active tertiary amine foaming catalyst, PMDETA has a strong foaming effect, which can improve the flow of foam and enhance the quality of products.PMDETA can also be used as a ligand for polyurethane foam catalysts and a ligand for functional polymerization materials. In addition, other applications are exemplified as follows. 1. Preparation of a two-phase amine absorber for capturing CO2. The two-phase amine absorber is a three-component system consisting of diethylenetriamine, pentamethylenetriamine, and water, and the total concentration of diethylenetriamine and pentamethylenetriamine in water is 4~5 mol/L, and the molar ratio of diethylenetriamine to pentamethylenetriamine is 1:4~4:1; these two organic amines alone do not have the ability to split the phase after absorbing CO2 in aqueous solution, but the two-phase amine absorber composed of the three-phase system But the two-phase amine absorber composed of this ternary system has the performance of phase separation, which is a homogeneous solution before absorbing CO2, and is divided into two phases after absorbing CO2 saturation. After saturated absorption, CO2 is enriched in the aqueous phase, and after phase separation, only the solution enriched in the CO2 phase needs to be regenerated thermally, thus greatly reducing the amount of enriched liquid required for regeneration, effectively reducing regeneration energy consumption, and also maintaining efficient CO2 absorption performance, which has a wide range of application prospects. 2. A methanol gasoline power accelerator. The accelerator consists of: isooctanol, aminoacetaldehyde diethyl acetal, 1,5-cyclooctadiene, 2-acetylbenzofuran, propargyl alcohol, n-propanol, zinc naphthenate, dinonyl naphthalene sulfonic acid, dipolyoxyvinyl aliphatic amine, and pentamethyldiethylenetriamine. The preparation method includes: a. Add isooctanol, aminoacetaldehyde diethyl acetal, 1,5-cyclooctadiene, 2-acetylbenzofuran to the reaction kettle and stir the reaction for 40-50 minutes at 60-62°C with closed ultrasonic stirring, b. Mix n-propanol, zinc naphthenate, dinonyl naphthalenesulfonic acid and stir for 15-25 minutes; c. Add propargyl alcohol, the mixture in step b, dipolyoxyvinyl fatty amine, pentamethyl diethylenetriamine, add them to the mixture in step a in turn, stir for 20~25 minutes at 33~35℃, and then cool down to obtain. Quality index. Content: ≥98% Specific gravity: 0.8330-0.8410 Refractive index: 1.4430-1.4450 Storage and transportation. Should be sealed and stored in a dry, cool and ventilated warehouse Packing. 200KG/drum Storage: It is recommended to be stored in dry and cool area with proper ventilation. Please fasten the lid as soon as possible after the original packaging to prevent the mixing of other substances such as water and other substances from affecting the product performance. Do not inhale dust and avoid skin and mucous membrane contact. Smoking, eating and drinking are prohibited in the workplace. After work, shower and change clothes. Store contaminated clothes separately and wash them before use. Maintain good hygiene habits. More:https://www.newtopchem.com/archives/668 Technical support and business contacts E-mail：info@newtopchem.com

NT CAT PC-8 CAS No.:98-94-2 Synthesis method and application Brief introduction. Chemical Chinese name: N,N-dimethylcyclohexylamine Chemical English name: N,N-dimethylcyclohexylamine; dimethyl aminocy clohexane Chemical Alias: Dimethyl aminocyclohexane CAS No.: 98-94-2 EC No.: 202-715-5 Molecular formula: C8H17N Synthesis method. N,N-dimethylaniline catalytic chlorination method In 1904, Sabatier et al. carried out the gas-phase hydrogenation of N,N a dimethylamine at a temperature of 160-180°C and at atmospheric pressure to produce DMCHA. Phenol method This method uses Pd or Rh as the catalyst, and phenol dimethylamine and hydrogen as raw materials. For example, when Pd is the catalyst, the catalyst dosage is 0.2~0.5, and the process conditions are 60~150℃, hydrogen pressure 0.15~0.48MPa, reaction time 6h, and the yield is between 70~80%. The raw material is available, and the reaction conditions are mild, but the catalyst is made of precious metals, and the yield is low. Cyclohexylamine method The process also uses formaldehyde and formic acid to react with cyclohexylamine, or uses oxides of Bi, Sb, Mg, A1, Lu, etc. as catalysts to react cyclohexylamine with methanol to methylate cyclohexylamine to produce DMCHA. the disadvantage of this method is the low selectivity of the former reaction, and the yield of the later methylation is not high. Cyclohexanone method Among the methods for the synthesis of DMCHA, the reductive amination method using cyclohexanone as raw material has more advantages: high conversion, yield and selectivity. The processes using Pd/C catalyst or Cu-A1 catalyst have their own characteristics and are currently under development in China. Uses. [Use I] Mainly used as polyurethane hard foam catalyst [Use II] N,N-dimethylcyclohexylamine can be used in a wide range of rigid foams. N,N-Dimethylcyclohexylamine is also suitable for the manufacture of rigid foam furniture frames and decorative parts. It can be used as the main catalyst alone in rigid foam products without the addition of organotin, or it can be supplemented with JD series catalysts according to the process and product requirements. It is also used as intermediate of rubber accelerator and synthetic fiber. Use III】It is used as intermediate of dyestuff, used to make vanillin, azo dyestuff, triphenylmethane dyestuff, also can be used as solvent, stabilizer, analysis reagent, etc.. Also used as catalyst. Storage and transportation. Should be sealed and stored in a dry, cool and ventilated warehouse Package: 200KG/drum 200KG/drum Storage: It is recommended to store in dry and cool area with proper ventilation. Please fasten the lid as soon as possible after original packaging to prevent the mixing of other substances such as moisture and other substances from affecting the product performance. Do not inhale dust and avoid skin and mucous membrane contact. Smoking, eating and drinking are prohibited in the workplace. After work, shower and change clothes. Store contaminated clothes separately and wash them before use. Maintain good hygiene habits. More:https://www.newtopchem.com/archives/40458 Technical support and business contacts E-mail：info@newtopchem.com

NT CAT T CAS:2212-32-0 Analysis and Precautions Introduction. CAS No.:2212-32-0 Molecular Formula: (CH3)2NCH2CH2N(CH3)CH2CH2OH Molecular weight: 146.23 Chinese name: 2-{[2-(dimethylamino)ethyl]methylamino}ethanol English name: 2-{[2-(Dimethylamino)ethyl]methylamino}ethanol English alias: 2-{[2-(Dimethylamino)ethyl]methylamino}ethanol Precise molecular weight/precise mass: 146.23 Molecular structure. 1、 Molar refractive index: 43.45 2. Molar volume (m3/mol): 156.0 3、 Isotropic specific volume (90.2K): 378.7 4、 Surface tension (dyne/cm): 34.6 5、 Dielectric constant (F/m): not available 6、 Dipole distance (D): not available 7、 Polarization rate (10 -24cm 3): 17.22 Oil-water partition coefficient / LogP. LogP value refers to the logarithmic value of the partition coefficient of a substance in the n-octanol/water two-phase system, reflecting the partition of the substance in the oil-water two-phase. The larger the LogP value, the more lipophilic the substance is; conversely, the smaller the LogP value, the more hydrophilic the substance is. Product use. Trimethylhydroxyethyl ethylenediamine is a low odor reactive foaming catalyst. Trimethylhydroxyethyl ethylene diamine is mainly used as a catalyst for polyether-based polyurethane flexible foam, molded foam, semi-rigid foam and rigid foam, and is especially recommended for automotive foam. Applications. 2-{[2-(dimethylamino)ethyl]methylamino}ethanol (dmemH) has been used for the preparation of new iron clusters: [Fe7O4 (O2CPh) 11 (dmem) 2] [Fe7O4 (O2CMe) 11 (dmem) 2] [Fe6O2 (OH) 4 (O2CBut) 8 (dmem) 2] Conditions to be avoided. Heat, flame and sparks. Incompatible substances. Strong oxidizing agent, strong acid Waste disposal methods: This explosive product can be burned in a chemical incinerator with post-combustion treatment and scrubbing action Dispose of the remaining and non-recyclable solution to a licensed company. Contact a licensed professional waste disposal facility to dispose of the substance. Contaminated containers and packaging Dispose of as unused product. Safety Information. Hazardous Transport Code: Not available Hazardous Material Marking: Irritant Safety Marking: S26 Hazardous Marking: R36/37/38 Description of necessary first aid measures. Consult a physician for general advice. Show this safety technical note to the physician who arrives at the scene. Inhalation If inhaled, move patient to fresh air. If breathing stops, perform artificial respiration. Consult a physician. Skin contact Flush with soap and plenty of water. Consult a physician. Eye contact Flush thoroughly with plenty of water for at least 15 minutes and consult a physician. Ingestion Do not induce vomiting. Do not give anything by mouth to an unconscious person. Rinse mouth with water. Consult a physician. Storage and transportation. Should be kept sealed and stored in a dry, cool and ventilated warehouse Packaging. 200KG/drum Storage: It is recommended to store in a dry and cool area with proper ventilation. Please fasten the lid of the package as soon as possible after the original packaging to prevent the mixing of other substances such as moisture from affecting the performance of the product. Do not inhale dust and avoid skin and mucous membrane contact. Smoking, eating and drinking are prohibited in the workplace. After work, shower and change clothes. Store contaminated clothes separately and wash them before use. Maintain good hygiene habits. More：https://www.newtopchem.com/archives/40573 Technical support and business contacts E-mail：info@newtopchem.com