Crusher Machine Application of plastic crusher: 1.Plastic crusher is used to shred waste plastics and factory plastic scraps. Plastic shredders are widely used in waste plastic recycling and factory scrap recycling. The motor power of the plastic shredder is between 15 and 150 kilowatts, and the speed of the knife roll is generally between 150 and 500 rpm. In terms of structure, there are tangential feeding and top feeding; 2.the knife roll is different from solid knife roll and hollow knife roll(waste plastic crushing machine). 2.Beverage bottle special crushing and washing machine, referred to as beverage bottle special crusher, also known as waste plastic crusher, beverage bottle crusher, has the characteristics of low speed, low noise, fast cutting and no slag. At the same time, wet pulverization, in addition to using the impact force of water to enhance the cleaning effect of pet fragments, reduces frictional heat due to the cooling effect of water, prolongs the service life of the tool, low maintenance cost and long service life(pet bottle shredder machine)! Technical Data of plastic crusher: Model of plastic crusherWSFS-180WSFS-250WSFS-300WSFS-400WSFS-500WSFS-600WSFS-800WSFS-900 Crushing chamber(mm)380x240504x320815x470815x520960x6101100x800480X800610X960 Crushing ability(kg/h)200-300300-400450-600550-700600-800700-1000750-1300800-1500 Stationary cutter22444488 Rotary cutter6691212122430 Power2.245.57.5111515-2230-45 Dimensions(L*M*H/CM)730*490*900900*650*12501000*750*11501050*860*13001400*1000*15001500*1200*17501600*1300*20801800*1500*2580 Net weight(kg)14025040045085095018003500 Applicable materials and characteristics of plastic crusher: 1. Plastic crusher is suitable for crushing all kinds of small and medium-sized plastic pipes, such as PE, PVC pipes, silicon core pipes and other pipes for crushing and recycling; 2. The round tube feeding port is designed for the crushing of pipe materials, which is convenient for the crushing of long strip pipes and improves work efficiency. The optional suction fan and storage bucket can be used to form a pipe crushing and recycling system, which can give full play to the recycling efficiency(small plastic crusher machine); 3. The sealed bearing is adopted to keep the bearing running well for a long time; the reasonable design of the knife shape can make the product granulated evenly; the heat shrinking treatment of the knife seat makes the appearance design beautiful(pet bottle crusher). Characteristics of Plastic basket shredder circuit board shredder,plastic crusher: 1. The plastic basket shredder is easy to operate, and the blade is simple and quick to change. The wide structure of the flat knife is suitable for crushing large-volume thin-walled and thin-material products, and improves the crushing efficiency. Equipped with electric control safety design, the hopper adopts a double-layer structure, filled with sound insulation materials, the motor is equipped with an overload protection device, and the power supply equipment has good safety and environmental protection, energy saving and durability(pet bottle shredder). 2. The principle of the head material plastic crusher is to drive the moving knife cutter head to rotate at a high speed through the motor. During the high-speed rotation of the moving knife, it will form a relative movement with the fixed knife and use the gap formed between the moving knife and the fixed knife to cause plastic smashing and shearing. The incision is made to crush the large pieces of plastic, and the crushed plastic is filtered and outputted by the size of the plastic particles through the screen. Maintenance of plastic crusher: 1. The plastic crusher should be placed in a ventilated position to ensure that the motor works to dissipate heat and prolong its life. 2. The bearing should be filled with lubricating oil regularly to ensure the lubricity between the bearings. 3. Regularly check the cutter screws. After the new plastic crusher is used for 1 hour, use tools to fasten the moving knife, the screws of the fixed knife, and the fixation between the blade and the knife holder(plastic crusher). 4. In order to ensure the sharpness of the knife incision, the knife should be checked frequently to ensure its sharpness and reduce unnecessary damage to other parts caused by the dullness of the knife edge. 5. When replacing the tool, the gap between the movable knife and the fixed knife: 0.8MM for crushers above 20HP, and 0.5MM for crushers below 20HP. The thinner the recycled material, the larger the gap can be(plastic crusher). 6. Before the first start, the remaining debris in the machine room should be removed to reduce the starting resistance. The inertia cover and pulley cover should be opened regularly to clear the ash outlet under the flange, because the powder discharged from the plastic crusher room enters the shaft bearing(plastic crusher). 7. The machine should be well grounded. 8. Regularly check whether the plastic crusher belt is loose, and adjust it in time.Crusher Machine website:http://www.lffoodmachine.com/crusher-machine/