The very first time you get your Roomba setup can be an electrifying experience since it signifies the start of a cleaner and more intelligent house. Regardless of whether you have just bought a brand-new machine or are reconnecting an old one, this Roomba setup guide will lead you step by step through every bit of the process.

  1. Charge and unpack your Roomba

First, unpack your Roomba and remove all the packaging. Place the charging dock on a flat surface with a wall behind it, leaving about 1.5 feet of space on each side. Now plug your Roomba into the dock to charge. A full charge is required before it can be used for the first time, and it usually takes two to three hours for that.

  1. Get the iRobot Home App

The next step is to get the iRobot Home app from Google Play (for Android) or the App Store (for iOS). Most of the setup of your Roomba will be done through this app, including connecting to Wi-Fi and scheduling cleanings.

Open the app, create an account, or if you are already a user, just complete the Roomba login process. The app will allow you to connect your Roomba to your Wi-Fi network by automatically scanning for devices nearby.

  1. Link the Roomba to the Internet

After you have logged in, connect your Roomba to Wi-Fi following the instructions of the app. Make sure that both the robot and your phone are on the same 2.4GHz network for a smooth connection. The configuration is finished when the Wi-Fi indicator light stays on and the Roomba chimes.

  1. Start the Cleaning Process

After the device has been set up, your first cleaning session can be started via the app or by pressing the "Clean" button. If you are connected to Google Assistant or Alexa, you can also use voice commands to schedule and set cleaning preferences.

  1. Roomba Resetting and Troubleshooting

If Roomba is not responding or connected, then try reset Roomba procedure. To switch off the lights, press and hold the "Clean" button for about 20 seconds and then release it. By doing so, your device will be reset, but all the data will still be there.

To know more, visit our website.